Rigol DG2000 Series User Manual

RIGOL
© 2006 RIGOL Technologies, Inc
User’s Guide for DG2000 Series
2-58
To Set the Utility Function
With the Utility function, you can set the parameters of the Generator such as: DC
On/Off, Sync On/Off, Output Parameter, Interface Parameter, System Setting and
Testing Parameter. The DC switch offers the options of DC output or Arbitrary
Waveform Output. Sync Switch offers the option to choose the Sync Signal or not. The
Output setting provides the parameter setting for Load/Impedance, Range, Normal/
Inverse and Phase. The Interface Setting offers the storage and load of the configure
parameter setting for GPIB (IEEE-488), LAN, RS232 or USB remote control. The
System Setting provides the setting for Language, Display, Beep, Screen Guard,
Format, Power System Configure and default setting. The test setting provides the
self-testing and calibration storage as well as the password and safety switch.
Press Utility to enter the Utility Menu. Its functions are listed below in table 2-26.
Figure 2-75 The Operation Menu

Rigol DG2000 Series Specifications

General

Brand	Rigol
Model	DG2000 Series
Category	Portable Generator
Language	English