Rigol DSA1000 Series User Manual

RIGOL Measurement Examples
3-8 User’s Guide for DSA1000 Series
Method 2: (Use AM demodulation function)
Procedures:
(1) Reset the analyzer
－Press Preset
(2) Set the parameters
－Press FREQ
－Press Center Freq and enter 100 MHz.
－Press SPAN
－Press Span and enter 10 MHz.
(3) Demodulate the signal
－Press Demod
－Press Demod and enter the lower menu.
－Press AM to turn on AM demodulation function.
The frequency can be described by the acuity level of the speaker.
(4) Set the parameters of AM demodulation function
－Press Demod Setup and enter the lower menu.
－Press Speaker to select whether or not to use the speaker under this
function.
－Press Demod Time and set the desired demodulating time.

Rigol DSA1000 Series Specifications

General

Brand	Rigol
Model	DSA1000 Series
Category	Measuring Instruments
Language	English