Rigol DSA1000 Series User Manual

RIGOL Front Panel Key Reference
2-8 User’s Guide for DSA1000 Series
Figure 2-3 After the Peak->CF
2.1.1.8 CF -> Step
Sets the current center frequency as the CF step. This function is usually used with
channel switching. Take harmonic waveform measurements for example: we can
locate a signal at the center frequency of a channel, execute CF-> Step and then
continuously press the down direction key to measure each order of harmonic in
sequence.
Peak
Center Freq

Rigol DSA1000 Series Specifications

General

Brand	Rigol
Model	DSA1000 Series
Category	Measuring Instruments
Language	English