RIGOL Quick Start
1-18 User’s Guide for DSA1000 Series
1.3.8 Change the Fuse
Please replace with specified fuse according to the following steps when needed:
1． Turn off the instrument, cut off the power and remove the power cord;
2． Prize out the fuse holder using a small straight screwdriver;
3． Take out the fuse;
4． Replace the old fuse with a specified one;
5． Re-install the fuse holder.
Figure 1-19 Change the fuse
WARNING
Please ensure that the instrument has been turned off and the power
source has been cut off before replacing the fuse in order to avoid electrical
shock.
Fuse holder
Fuse
To Next Page
Loading...
Need help?
General
