PowerFlex Digital DC Drive User Manual - Publication 20P-UM001C-EN-P - July 2008
Programming and Parameters 3-55
UTILITY
User Defined
54 [UsrValDiv1]
Denominator in the calculation for scaling the user-defined, drive
speed display units.
Note: This parameter is not used.
Default:
Min/Max:
1
1 / 32767
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
[UserDefined0]
[UserDefined1]
[UserDefined2]
[UserDefined3]
[UserDefined4]
[UserDefined5]
[UserDefined6]
[UserDefined7]
[UserDefined8]
[UserDefined9]
[UserDefined10]
[UserDefined11]
[UserDefined12]
[UserDefined13]
[UserDefined14]
[UserDefined15]
General use signed 16 bit variables used for data exchange.
Note: Pars 503–506 can be assigned to analog inputs. The values of
Pars 503, 504, and 507 - 509 can be assigned to an analog output.
Default:
Min/Max:
0
–32768/+32767
519 [UsrDefBitWrdA]
A bitmap of Pars 520 [UsrDefBitWrdA0] through 535
[UsrDefBitWrdA15]. With a parameter it is possible to read or write all
of the bits inside a word.
Example:
[UsrDefBitWrdA0] 0
[UsrDefBitWrdA1] 1 = 2
1
=2
[UsrDefBitWrdA2] 0
[UsrDefBitWrdA3] 0
[UsrDefBitWrdA4] 0
[UsrDefBitWrdA5] 1 = 2
5
= 32
[UsrDefBitWrdA6] 1 = 2
6
= 64
[UsrDefBitWrdA7] 0
[UsrDefBitWrdA8] 0
[UsrDefBitWrdA9] 0
[UsrDefBitWrdA10] 1 = 2
10
= 1024
[UsrDefBitWrdA11] 0
[UsrDefBitWrdA12] 1 = 2
12
= 4096
[UsrDefBitWrdA13] 0
[UsrDefBitWrdA14] 0
[UsrDefBitWrdA15] 0
[UsrDefBitWrdA] = 2 + 32 + 64 + 1024 + 4096 = 5218
Note: This parameter can be assigned to a digital input or output. The
bit number corresponds to the digital input/output number (e.g.,
digital input 3 uses [UsrDefBitWrdA3]). Relay Outputs 1 and 2 use
bits 14 and 15, respectively.
Default:
Min/Max:
0
0 / 65535
520 -
535
File
Group
No.
Parameter Name & Description
See page 3-2 for symbol descriptions
Values
Related
A
A
A
To Next Page
Loading...
Need help?
General
