114
Playing Rhythms
The rhythm patterns you create are temporary; they are deleted as
soon as you turn off the power or select some other rhythm patterns.
You can store 256 rhythm patterns in the User memory.
1.
Confirm that the current rhythm pattern is the one you want
to save.
2.
In the Rhythm Pattern Edit screen (p. 113) or the Rhythm
Step Rec screen (p. 111), press [SHIFT] so it lights, and then
press .
The Rhythm Pattern Name screen will appear.
fig.13-024
3.
Assign a name to the rhythm pattern.
For details on assigning names, refer to
“Assigning a Name”
(p. 39)
4.
When you have finished inputting the name, press [ENTER].
A screen will appear, allowing you to select the write-
destination.
fig.13-025
5.
Press [ENTER].
A message will ask you for confirmation.
fig.13-026
6.
Press [ENTER] to execute the save operation.
* To cancel the operation, press [EXIT].
Never switch off the Fantom-XR while data is being saved.
Rhythm patterns are not part of the performance data; they are
maintained as separate data. This lets you use a rhythm pattern
with different rhythm sets and performances.
Rhythm patterns generated by the Fantom-XR can be recorded on an
external sequencer. To do this, you will normally leave the settings
as shown in the connection example on p. 29, and make the
following settings only while recording the rhythm patterns.
Settings on the Fantom-XR
•
USB-MIDI Thru:
OFF
•
Tx Note:
ON
In the Patch Mode
Settings on your external MIDI keyboard
• Set the transmit channel to match the receive channel of the
Fantom-XR’s “Patch Mode Rx Ch” (p. 156).
Settings on your external sequencer
• Set the receive channel to match the receive channel of the
Fantom-XR’s “Patch Mode Rx Ch.”
• Turn OFF settings that are labeled “MIDI Thru” or “Thru.”
In the Performance Mode
Settings on your external MIDI keyboard
• Set the transmit channel to match the receive channel of the
Fantom-XR’s “Rhy Ptn Channel” (p. 111).
Settings on your external sequencer
• Set the receive channel to match the receive channel of the
Fantom-XR’s “Rhy Ptn Channel.”
• Turn OFF settings that are labeled “MIDI Thru” or “Thru.”
* When you’ve finished recording the rhythm patterns and want to
resume conventional recording, restore the above settings to their
original state.
Saving the Patterns You
Have Created (Write)
Recording rhythm pattern
playback on your external
sequencer
Fantom-XR_r_e.book 114 ページ ２００６年４月４日 火曜日 午前１０時１４分
To Next Page
Loading...
Need help?
General
