27
Playing Sounds
1.
Press [MODE] so the button lights in red.
You will enter Patch mode, and the Patch Play screen will appear.
2.
Press [CURSOR] to move the cursor to the patch type.
fig.03-009.e
3.
Turn the VALUE dial or use [INC][DEC] to set the patch type to “Rhythm.”
fig.03-010
The rest of the procedure is the same as when choosing a Patch.
Choosing a Rhythm Set
Basic Procedure for Choosing a Rhythm Set
Patch type
The value will change in larger
steps if you turn the VALUE
dial while holding down
[VALUE].
There are no categories for
rhythm sets, so you can’t
choose them by category.
Fantom-XR_r_e.book 27 ページ ２００６年４月４日 火曜日 午前１０時１４分
To Next Page
Loading...
Need help?
General
