218
Error Messages
If an incorrect operation is performed, or if processing could not be performed as you specified, an error message will appear. Refer to the
explanation for the error message that appears, and take the appropriate action.
Message
Meaning Action
Cannot Edit Preset Sample!
This is a preset sample, and therefore cannot be edited. —
Cannot Edit GM Patch
This is a GM patch, and therefore cannot be edited. —
Cannot Write GM Patch
This is a GM patch, and therefore cannot be saved. —
Card Not Ready!
A memory card is not inserted in the slot. Insert a memory card into the slot.
Empty Sample!
The sample contains no data. Select a sample that contains data.
File Name Duplicate
A file with the same name already exists. Delete the file bearing the same name from the disk,
and if overwriting and saving the data, merely save
the file. If you do not want to delete the file with the
same name from the disk, either save the file with a
different name.
Illegal File!
The Fantom-XR cannot use this file. —
Memory Damaged!
The contents of memory may have been damaged. Please perform the Factory Reset operation.
If this does not resolve the problem, please contact
your dealer or the nearest Roland Service Center.
Memory Full!
Saving is not possible because there is insufficient space
in the user area or memory card.
Delete unneeded data.
MIDI Offline!
There is a problem with the MIDI cable connection. Check that the MIDI cable has not been disconnect-
ed or broken.
No More Sample Numbers!
The sample cannot be divided any further. Erase unneeded samples in order to allocate 256 or
more consecutive sample numbers.
Since fewer than 256 consecutive sample numbers are
vacant, no further sampling is possible.
Permission Denied!
The file is protected. —
Sample Length Too Short!
The sample is too short, and cannot be edited correctly. If the sample is extremely short, editing may not
produce the desired result.
Sample Memory Full!
Since there is insufficient sample memory, no further
sampling or sample editing is possible.
Erase unneeded samples.
Too Many Sample Selected!
The operation cannot be executed, since marks are as-
signed to more than one sample.
Either clear the marks, or mark only one sample.
Unformatted!
The memory card is in an unsupported format. Format the memory card.
Fantom-XR_r_e.book 218 ページ 2006年4月4日 火曜日 午前10時14分