18
Chapter 2. Playing Patterns
Selecting a sound
(Patch/Rhythm set)
The D2’s Patterns are composed of up to eight Parts, and
different Patches (Part1 - 7: Patches, Part R = Rhythm set) can
be selected for each Part. To change tones, first select the
desired Part.
First, specify the part for which you will select a patch.
1. Press [PART SELECT].
The part button of the currently selected part (the
current part) will light.
2. Press the part button ([R] or [1]–[7]) of the part
whose patch you wish to change.
The part of the button you pressed will become the
current part, and that part button will light.
Select a patch.
3. Press [DISPLAY] enough times to get the PATCH
indicator to light.
4. Turn [VALUE] to select the desired patch.
• By holding down [DISPLAY] and turning [VALUE] you
can change the patch (or rhythm set) in units of ten.
• By holding down [EXIT] and turning [VALUE] you can
switch banks.
5. After you have finished making the setting, press
[EXIT] to return to the previous display.
Part R
–
R-A 01–26 Preset Rhythm Set (Bank A)
R-B 01–04 Preset Rhythm Set (Bank B)
R-U 01–20 User Rhythm Set
Part 1–7
–
P-A 001–128 Preset Patch (Bank A)
P-B 001–128 Preset Patch (Bank B)
P-C 001–128 Preset Patch (Bank C)
P-D 001–128 Preset Patch (Bank D)
P-E 001–088 Preset Patch (Bank E)
P-U 001–256 User Patch
Saving a patch
Here’s how the sound you modified by using D-FIELD filter
(p. 33), envelope (p. 34), and LFO (p. 36) operations can be
saved as a patch.
1. Press [DISPLAY] to access the patch select screen.
2. Modify the sound parameters.
3. Press [WRITE].
A screen will appear in which you can specify the save
destination patch.
4. Turn [VALUE] to select the save destination patch.
The settings will be saved in the patch you select here.
The previously-saved patch will be erased, so be careful
when making this selection.
5. Press [ENTER].
The display will ask “SurE” (are you sure you want to
save?).
6. If you wish to save, press [ENTER].
* If you decide not to save, press [EXIT].
If you select another patch or turn off the power without
saving the patch you edited, your edits will be lost.
To Next Page
Loading...
Need help?
General
