31
Chapter 3. About the D-FIELD
Chapter 3
Auditioning the sound of a patch (ASSIGN 1: PATCH PREVIEW)
fig.PRV—
You can press each of the eight D-FIELD areas to hear the sound of each part. Pressing D-FIELD 8 will sound the rhythm part.
* The note number (pitch) that is played can be modified by holding down REC FUNCTION (p. 63) [NOTE NUMBER], and turning
[VALUE].
You can check the currently sounding part and note number by pressing [DISPLAY] to set it to “D-FIELD.”
Playing a monophonic synth sound (ASSIGN 1: SOLO SYNTH)
fig.SYN—
The sound will play when you press the D-FIELD. Left/right movement will change the pitch, and up/down movement will
change the volume.
➔ Changing the D-FIELD settings (p. 22)
Making detailed settings
1. Hold down [ASSIGN 1] and press [EDIT].
2. Press [ENTER] to select the desired parameter.
3. Turn [VALUE] to change the setting.
* The solo synth sounds are the sounds of the following patches.
Display Explanation Setting
TYPE Select the solo synth sound. 1–14
X none Pitch Pitch (fixed)
Y none Level Level (fixed)
Display Parameter Explanation Setting
SOUND Select the solo synth sound. 1–14
OCTAVE RANGE Adjust the pitch range in octave units. -4–4
REVERB SEND LEVEL Adjust the reverb depth. 0–127
DELAY SEND LEVEL Adjust the delay depth. 0–127
No. Patch No. Patch No. Patch
1 P-E001: SOLO Saw 11 P-A030: Square Lead1 21 P-B005: Saw Stack 1
2 P-E003: Fright Saw 12 P-A040: PortaSynLead 22 P-B006: Saw Stack 2
3 P-E006: SOLO PWM 13 P-A042: Beep Mod 23 P-B012: Good Bean
4 P-E007: SOLO Square 14 P-A045: JU2 SubOsc 1 24 P-B014: Mega 5th
5 P-E008: Square Lead4 15 P-A054: Sine Tone 25 P-B025: Sweep Pad 2
6 P-E012: SOLO Choir 16 P-A057: Big Up Massv 26 P-B045: Atmosphere 2
7 P-E013: SOLO Sin 17 P-A064: Dark SawLead 27 P-B094: Cal + After
8 P-E015: Sweep Beep 18 P-A068: Voc Saw 28 P-C005: P5 Noise
9 P-E037: Saw Stack 3 19 P-A112: NU-NRG Bass 29 P-C050: Pop Organ
10 P-E063: Powerful Org 20 P-B001: Strong Brass 30 P-C098: Hush Brass
To Next Page
Loading...
Need help?
General
