Roland V-combo VR-09 User Manual

Detailed Settings for All Functions (Menu)
47
Category Parameter Value Explanation
Controller Modulation Lever
Using the Modulation Lever to Turn the Rotary Eect On/O
(Modulation Lever)
You can select whether the modulation lever will turn the rotary eect on/o.
* This applies only when you’re playing organ sounds.
OFF The modulation lever will not turn the rotary eect on/o.
ROTARY ON/OFF Moving the modulation lever away from yourself will turn the rotary eect on/o.
PK Setting
Registration Shift
Using a Footswitch to Change Registrations (Registration
Shift)
You can assign the footswitch of the pedalboard (PK-9; sold separately) to switch consecutively through registrations.
OFF The function assigned to the footswitch (L Foot Switch and R Foot Switch settings) will be available.
RIGHT
The right footswitch will be dedicated to switching registrations.
* The function assigned to the right footswitch (R Foot Switch setting) will be unavailable.
LEFT
The left footswitch will be dedicated to switching registrations.
* The function assigned to the left footswitch (L Foot Switch setting) will be unavailable.
L Foot Switch,
R Foot Switch
Changing the Function of the Footswitches (L Foot Switch, R
Foot Switch)
You can select the functions that are assigned to the footswitches of the pedalboard (PK-9; sold separately).
ROTARY FAST/SLOW Switch the rotary speed between “FAST” and “SLOW.”
RHYTHM START/STOP Start/stop the rhythm pattern.
SONG START/STOP
Same function as the [
] (START/STOP) button.
DAMPER OF UPPER Notes played in the upper part will be sustained while you continue holding the footswitch.
DAMPER OF LOWER Notes played in the lower part will be sustained while you continue holding the footswitch.
N. CONTROL1 You can produce richer and more realistic performance expressions by applying various eects to
acoustic sounds.
For details on these eects and on the acoustic sounds to which they can be applied, refer to
“Applying eects to specic acoustic sounds” (p. 50).
N. CONTROL2
OFF Turn o the footswitch function.
N.Control
Selecting the Part(s) Aected by the Acoustic Sound Eect (N.
Control)
You can select the part(s) that will be aected when you use the footswitches of a pedalboard (PK-9; sold separately) to activate
an eect for acoustic sounds (p. 50).
to ALL The eect will be applied to the upper part and the lower part.
to LOWER The eect will be applied to the lower part.
to UPPER The eect will be applied to the upper part.
Media
Utility
Save Registration
All registrations stored in the VR-09 can be saved to your USB ash drive.
REFERENCE
For details, refer to “Saving Registrations to a USB Flash Drive (Save Registration)” (p. 39).
Load Registration
Load a registration set saved on a USB ash drive into the VR-09.
REFERENCE
For details, refer to “Loading Saved Registrations from a USB Flash Drive (Load Registration)” (p. 40).
Delete Registration
Delete a registration set saved on a USB ash drive.
REFERENCE
For details, refer to “Deleting Saved Registrations from a USB Flash Drive (Delete Registration)” (p. 40).
Format USB
This formats (initializes) a USB ash drive for use with the VR-09.
REFERENCE
For details, refer to “Formatting a USB Flash Drive (Format USB)” (p. 41).
For details about how to make menu
settings, see p. 42.
Introduction Performing Recording Looper Settings
Appendix

Roland V-combo VR-09 Specifications

General

Equalizer	Yes
Product type	Digital synthesizer
Product color	Black
Sound effects	Compression, Delay, Overdrive, Reverberation
Sound effects quantity	223
Keyboard number of keys	61
Maximum polyphony (notes)	128
Reverberation effects quantity	6
Headphone outputs	1
6.35 mm (1⁄4-inch) output	2
Battery type	AA
Operating time	5 h
Power source type	AC, Battery
Number of batteries supported	8

Weight and Dimensions

Depth	300 mm
Width	1008 mm
Height	106 mm
Weight	5500 g