Roland V-combo VR-09 User Manual

52
About the Wireless LAN Function
What is Wireless LAN Function?
By inserting the wireless USB Adapter (WNA1100-RL; sold
separately) into the VR-09’s USB MEMORY port, you’ll be able to use
wireless-compatible applications.
VR-09
Wireless USB Adapter
(WNA1100-RL; sold
separately)
Wireless LAN access point
(e.g., wireless LAN router)
Wireless LAN Wireless LAN
iPad etc.
Items required to use the wireless LAN
function
 Wireless USB Adapter (WNA1100-RL; sold separately) *3
 Wireless LAN access point (e.g., wireless LAN router) *1 *2
 iPad or iPhone etc.
* The wireless LAN access point you use must support WPS.
If you’re unable to connect to the wireless LAN access point,
then connect using Ad-Hoc mode (p. 54).
*2 The ability to connect with all kinds of wireless LAN access
points is not guaranteed.
*3 In some countries, the Wireless USB Adapter is not sold due to
regulations concerning radio-frequency equipment.
For information on whether the Wireless USB Adapter can be
used in your country, please contact the nearest Roland Service
Center, or an authorized Roland distributor, as listed on the
“Information” page.
Basic Connection Method (Connect
by WPS)
The rst time you connect the VR-09 to a wireless network, you’ll
need to perform the following procedure (WPS) to join the wireless
network.
This procedure is required only the rst time. (Once you’ve joined
the network, this procedure will no longer be necessary.)
What is WPS?
This is a standard that makes it easy to make security
settings when connecting to a wireless LAN access point. We
recommend that you use WPS when connecting to a wireless
LAN access point.
1. Insert the wireless USB Adapter (WNA1100-RL; sold
separately) into the VR-09’s USB MEMORY port.
2. Press the [MENU] button of the VR-09.
3. Use the [VALUE] dial to select “Wireless.”
4. Press the [ENTER] button of the VR-09.
The wireless menu screen (p. 53) appears.
5. Use the CURSOR [ ] [ ] buttons to select “WPS.”
The WPS screen appears.
6. Perform the WPS operation on your wireless LAN access
point (e.g., press the WPS button on your wireless LAN
access point).
For details on WPS operation of your wireless LAN access point,
refer to the documentation for your wireless LAN access point.
7. Press the [ENTER] button of the VR-09.
When the connection is successful, the screen will indicate
“CONNECTED.”
* It may take one or two minutes for the connection to succeed.
8. Press the [EXIT] button several times to return to the
previous screen.
You can use the wireless connection from an iPad app etc. Choose
“VR-09” in the instrument select screen of your iPad app.
NOTE
The device (e.g., iPad) running the app must be connected to
the same network.
MEMO
• The connection data is stored in memory when you perform
the WPS procedure; the device will automatically connect to the
wireless network the next time.
• All connection data will be erased if you perform a factory reset.
Icons in the display
The wireless LAN status is shown in the upper part of the
display.
Icon Explanation
Currently connected to the wireless LAN access point.
Three bars are used to indicate the signal level (the
strength of the connected wireless LAN access point’s
radio signal).
The wireless USB adapter is inserted, but not connected
with a wireless LAN access point.
The wireless USB adapter is not inserted (nothing is
displayed).
Ad-Hoc mode (p. 54).

Roland V-combo VR-09 Specifications

General

Equalizer	Yes
Product type	Digital synthesizer
Product color	Black
Sound effects	Compression, Delay, Overdrive, Reverberation
Sound effects quantity	223
Keyboard number of keys	61
Maximum polyphony (notes)	128
Reverberation effects quantity	6
Headphone outputs	1
6.35 mm (1⁄4-inch) output	2
Battery type	AA
Operating time	5 h
Power source type	AC, Battery
Number of batteries supported	8

Weight and Dimensions

Depth	300 mm
Width	1008 mm
Height	106 mm
Weight	5500 g