Roland V-combo VR-09 User Manual

About the Wireless LAN Function
53
Wireless LAN Function Settings
You can view or edit the wireless settings.
Wireless Menu (Wireless)
1. Press the [MENU] button.
2. Use the [VALUE] dial to select “Wireless.”
3. Press the [ENTER] button.
The wireless menu screen appears.
4. Use the CURSOR [ ] [ ] buttons to select the menu that
you want to edit.
Menu Explanation
WPS Connect using WPS (p. 52).
Options
Make settings for Wireless ID or Ad-Hoc mode
(Ad-Hoc Mode) (p. 53).
5. Press the [ENTER] button.
Status indication
The wireless LAN status is shown at the beginning of the
wireless menu screen.
Display Explanation
CONNECTED
Currently connected to the wireless LAN
access point.
The identier (name) of the connected
wireless LAN access point is shown.
NOW CONNECTING
A connection with the wireless LAN access
point is being established.
NOT CONNECTED
The wireless USB adapter is inserted, but
not connected to a wireless LAN access
point.
NOT AVAILABLE The wireless USB adapter is not inserted.
AdHoc
Ad-Hoc mode (p. 54).
The Ad-Hoc SSID and Ad-Hoc Key are
shown.
For details, refer to “Connecting in Ad-Hoc
mode (Ad-Hoc Mode)” (p. 54).
Other Settings (Options)
Make settings for Wireless ID or Ad-Hoc mode (Ad-Hoc Mode).
1. Select the “Options” from the wireless menu, and press
the [ENTER] button (p. 53).
The Options screen appears.
Parameter Explanation
Wireless ID
Species the nal digits of the VR-09 ’s device name
and Ad-Hoc SSID ( VR-09 ) that will be shown as the
instrument in the wirelessly connected app.
Normally, you should specify “0,” but if you have
more than one of the same instrument, you can set
the Wireless ID in the range of 1–99 to change the
device name and Ad-Hoc SSID for each instrument,
as follows.
If Wireless ID=0, “VR-09” (default value)
If Wireless ID=1, “VR-09_1”
:
If Wireless ID=99, “VR-09_99”
Ad-Hoc Mode Turns Ad-Hoc mode on/o.
Ad-Hoc Channel Species the channel (1–11) for Ad-Hoc mode.
* The Options settings are conrmed and saved when exiting
from the Options screen.
* If you change the Wireless ID or the Ad-Hoc Channel, it may take
one or two minutes for the connection to succeed.
Introduction Performing Recording Looper Settings
Appendix

Roland V-combo VR-09 Specifications

General

Equalizer	Yes
Product type	Digital synthesizer
Product color	Black
Sound effects	Compression, Delay, Overdrive, Reverberation
Sound effects quantity	223
Keyboard number of keys	61
Maximum polyphony (notes)	128
Reverberation effects quantity	6
Headphone outputs	1
6.35 mm (1⁄4-inch) output	2
Battery type	AA
Operating time	5 h
Power source type	AC, Battery
Number of batteries supported	8

Weight and Dimensions

Depth	300 mm
Width	1008 mm
Height	106 mm
Weight	5500 g