Samsung BD-P1600 User Manual

audio setup _
(B t· Be sure to select the correct Digital Output or you will hear no sound or a loud noise.
If the HDMI device (Receiver, lV) is not compatible with compressed formats (Dolby digital, DTS), the audio
signal outputs as PCM.
Secondary and Effect audio will not be heard with regular DVDs.
" Some Blu-ray Discs do not have Secondary and Effect audio.
This Digital Output setup does not effect the analog (UR) audio or HDMI audio output to your TV. It effects
the optical and HDMI audio output when connected to a receiver.
When the player outputs HD audio bitstream(Dolby TrueHD or DTS-HD Master Audio) from the Optical jack to
an HDMI1.3 receiver, only 2 channel PCM audio will be heard.
If you play MPEG audio soundtracks, audio signal outputs PCM regardless of Digital Output Selections(PCM
or Bitstream).
PCM Down Sampling
----'----=------------------
• On : Select this when the Amplifier connected to the
player is not 96KHz compatible. 96KHz signals will be
down converted to 48KHz
• Off : Select this when the Amplifier connected to the
player is 96KHz compatible. Signals will be output without
any changes.
Even when PCM Down Sampling is set to Off, some discs will only output downsampled audio through the
optical digital outputs.
HDMI
• If your "TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS) , the unit may
output PCM 2ch down mixed audio even though you set Bitstream(either Re-encode or Audiophile)
on your setup menu.
• If your "TV is not compatible with PCM sampling rates over 48kHz, the unit may output 48kHz
downsampled PCM audio even though you set "PCM Down Sampling" to Off.
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
•
On : When Movie soundtracks are played at low volume
or from smaller speakers, the system can apply
appropriate compression to make low-level content more
intelligible and prevent dramatic passages from getting
too
loud.
• Off: You can enjoy the movie with the standard Dynamic
Range.
38 __ audio setup

Samsung BD-P1600 Specifications

Video Output

HDMI video output	1080p, 1080i, 720p, 480p
CVBS output	480i
Component video out	1080i, 720p, 480p, 480i

Audio Output

audio out	1 rear
optical out	1 rear
audio D/A converter	24-bit/192KHz

Weight and Dimensions

dimensions	17.0” x 2.13” x 7.83”
weight	4.85 lbs.