Samsung BD-P1600 User Manual

systeOli1pgrad~e _
Samsung may offer upgrades to your Blu-ray Disc Player's firmware in the future. To upgrade this firmware you must:
1. Go to samsung.com and refer to the 'SUPPORT page to download the latest firmware.
You can use a CD-R or a USB flash drive to perform the firmware upgrade. For more information, see
"Upgrade Manual" at the website mentioned above.
or
2. Connect the network (see pages 29-30) and follow the steps below.
FIRMWARE UPGRADE
1. With the unit in Stop mode/No Disc mode, press the MENU
button.
2. Press the & T buttons to select Setup, then press the ENTER
or ~ button.
3. Press the & T buttons to select System Setup, then press the
ENTER or ~ button.
4. Press the & T buttons to select System Update, then press
the ENTER or ~ button.
5. The player will check the cable or network connection status
automatically. The connection checking window will be
displayed .
•
If the upgrade is possible: You will see information on the
current and new versions of firmware in a message box .
•
If the upgrade is not possible: You will see the following
description in the message box.
• If the cable is not connected :
"Ethernet cable is not connected. Please, check the
Ethernet cable"
• If the network connection has failed :
"This system can not connect to internet for update.
Please, check the network setup"
•
If no latest version is released (the latest version has been
already installed) :
"The latest version of the firmware is already installed.
There is no need to update."
54 system upgrade

Samsung BD-P1600 Specifications

Video Output

HDMI video output	1080p, 1080i, 720p, 480p
CVBS output	480i
Component video out	1080i, 720p, 480p, 480i

Audio Output

audio out	1 rear
optical out	1 rear
audio D/A converter	24-bit/192KHz

Weight and Dimensions

dimensions	17.0” x 2.13” x 7.83”
weight	4.85 lbs.