Samsung BD-P1600 User Manual

• If DHCP is set to On and, DNS to Manual,
enter your DNS Server.
------l- Setup not available
Setup available
• If DHCP is set to On and, DNS to Auto,
you don't need further or additional
settings.
.,~ Setup not available
[EJ H When you select an item, use the number and ........ ~ buttons.
... If the automatic settings don't work, contact your ISP.
7. When done, use the .... buttons to select Save, then press the ENTER button.
8. If you don't want to save your work, use the ........ ~ buttons to select Cancel, then press the
ENTER button.
[EJ " The IP address used in this manual is for illustrative purposes only. You must refer to the your network
settings for the actuallP address .
.. To obtain settings for IP address, Subnet mask, Gateway and DNS Server, check the network settings in your
computer or contact your internet service provider.
Proxy Setting
A proxy server services requests by forwarding them to other servers.
If you are required to configure the proxy setting, enter the settings specified by the ISP.
To setup, follow steps 1-3 on page 48.
4. Press the .... buttons to select Proxy, then press the
ENTER or ~ button.
• Server
•
Port
• User
•
Password
[EJ , For more information, contact your ISP (Internet Service Provider).
English _51

Samsung BD-P1600 Specifications

Video Output

HDMI video output	1080p, 1080i, 720p, 480p
CVBS output	480i
Component video out	1080i, 720p, 480p, 480i

Audio Output

audio out	1 rear
optical out	1 rear
audio D/A converter	24-bit/192KHz

Weight and Dimensions

dimensions	17.0” x 2.13” x 7.83”
weight	4.85 lbs.