DTV Audio Level
Screen Menu
>
Sound
>
Additional Settings
>
DTV Audio Level
Try Now
(Digital channels only)
The TV cannot freely control the volume of the digital audio that it sends to the AV receiver. Use this
to set the digital audio volume at a comfortable level.
"
According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB.
"
To increase or decrease the volume, adjust between the range 0 and -10 respectively.
Digital Audio Out
Screen Menu
>
Sound
>
Additional Settings
>
Digital Audio Out
Try Now
This SMART TV is SPDIF-enabled. The Sony Philips Digital Interface (SPDIF) provides digital audio
output to speakers and various digital devices, including A/V Receivers and home theatres. This feature
reduces interference and distortion.
●
Audio Format
Selects the Digital Audio output (SPDIF) format. The available Digital Audio output (SPDIF)
formats may vary depending on the input source.
●
Audio Delay
This setting helps correct timing mismatches between the audio and video tracks when watching
TV and listening to audio through a digital audio device. Enabling the feature displays a slide bar
that you can use to adjust the delay by up to 250ms.
To Next Page
Loading...
Need help?
General