Add the External Device
1.
Turn on the external device you wish to set up universal remote function for and then press
SOURCE to bring up the Source screen.
2.
Select Universal remote setup from the top of the screen. This initiates the universal remote
setup process.
3.
Follow the on-screen instructions for the Universal remote setup. If it does not respond properly,
set up the remote control by entering the model number manually.
Using the Universal Remote Control
By configuring the universal remote control feature for a connector to which an external device is
already connected, you can use the Smart Touch Control as a universal remote control simply by
sending the input signals to the corresponding connector.
Registered External Device Management
From the Universal remote setup screen, select a registered external device. The following options are
available:
●
Source Setup
Change the TV's input connector that the external device is connected to.
●
Synced Power Off
Configure the external device to turn off when the TV is turned off.
●
Rename
Rename the registered external device (up to 15 characters long).
●
Delete
Delete the registered external device.
To Next Page
Loading...
Need help?
General