Anynet+ (HDMI-CEC) Device Menu
Once the TV has switched over to the selected device, you can access the device's menu using
the TV's remote control. Select the Virtual Remote panel's TOOLS button to display the list. Select
Anynet+ (HDMI-CEC) from the list. The following Anynet+ device options will appear. The displayed
Anynet+ device options may vary depending on the external device.
●
View TV
Select this to switch the remote control mode to the TV.
●
Device List
Displays a list of Anynet+ (HDMI-CEC) devices connected to the TV. To change a device, select a
desired device in the list.
●
(Connected Device) Menu
Display the menu of the connected device. If the target device is a DVD player, the DVD menu is
shown.
●
(Connected Device) Tools
Display a list of frequently-used functions that are available for the device. If the target device
is a DVD player, the DVD playback menu is shown. Some external devices may not support this
option.
●
(Connected Device) Title Menu
Display the connected device's title menu. If the target device is a DVD player, the DVD title menu
is shown. Some external devices may not support this option.
●
Receiver
Listen to audio from the connected external device through an AV receiver, such as a home
theatre system, instead of the TV speakers. This option is only available when there is an AV
receiver connected to the TV. The menu may not be shown with receivers that support audio only.
To Next Page
Loading...
Need help?
General