Password
System
Device Manager
Eco Solution
Auto Protection Time 2 hours
General
Change PIN
Anynet+ (HDMI-CEC) On
DivX® Video On Demand
"
The displayed image may differ depending on the model.
This TV requires a password to lock out channels and to reset its settings to the factory default.
Change Password
Screen Menu
>
System
>
Change PIN
Try Now
Change the TV's password.
1.
Run Change PIN and then enter the current password in the password field. The default password
is 0000.
2.
Enter a new password and then enter it again to confirm it. The password change is complete.
If you forget the PIN code, press the buttons in the following sequence which resets the PIN to “0-0-
0-0”:
For Standard Remote Control: In Standby mode: MUTE → 8 → 2 → 4 → POWER (on)
For Smart Touch Control: When the TV turnes on: MUTE → Volume up → RETURN → Volume down →
RETURN → Volume up → RETURN
To Next Page
Loading...
Need help?
General