FLICKER-REDUCTION SETTING (VIDEO CLIP
SHOOTING ONLY)
The flicker-reduction setting reduces the flicker that results when filming video
clips under fluorescent lights and the like where the background lighting
pulsates at the frequency of the power supply. The flicker-reduction setting is
set for a frequency of 50 Hz.
1
Display the Video Clip Shooting Setting Screen (see page 39).
2
Select a flicker-reduction setting
from the flicker-reduction setting
menu.
w: Turns off the flicker-reduction
setting.
k: Turns on the flicker-reduction
setting.
3
Press the SET button.
œ This completes the flicker-reduction setting.
HINT
œ Note that although the flicker-reduction setting decreases the image flicker
that occurs under fluorescent lighting, the image quality may deteriorate
slightly.
œ If the flicker-reduction is set to k, then the ISO sensitivity setting (see
page 103) becomes fixed at B.
FLICKER REDUCT
00:49
SX215/EX, U (VPC-MZ2 GB) Mon. March 25/2002
English
106
To Next Page
Loading...
Need help?
General
