CHECKING THE REMAINING BATTERY
CHARGE
When using nickel metal hydride batteries, the remaining battery charge can
be checked on the LCD monitor. Make sure to check this indicator before
capturing an image. For an indication of the possible length of time for battery
operation, see page 200.
1
Display a Shooting or Playback
Information Screen (see pages 93
and 119).
œ The batteries remaining charge
indicator appears in the lower right
corner of the LCD monitor.
œ êç and ëç (flashing) will
appear even when the Shooting
Information Screen or Playback
Information Screen is not displayed.
œ Due to the battery characteristics, when the ambient temperature is
low, èç may appear early for an incorrect indication of the remaining
charge. Also, depending on the conditions of use of the digital camera
or the ambient conditions (temperature, etc.), the indicated remaining
charge may change. Therefore, this indication can only be used as a
general approximation of the remaining charge.
Indicator
Remaining charge
Information
Screen
When
Information
Screen is not
displayed
éç
No indication Approx. full.
èç
No indication Battery power is low.
êç êç
It will soon be impossible to capture or
playback images.
ëç ëç
If this icon flashes when the shutter
button is pressed, images cannot be
captured. If it flashes while editing a
video clip, the editing cannot be
performed. Recharge the batteries.
INFO
PRESS SET TO SELECT 14
Indicator
SX215/EX, U (VPC-MZ2 GB) Mon. March 25/2002
English
174
To Next Page
Loading...
Need help?
General
