CONTROL UNIT
75
10
10-1 REMOVING THE CONTROLLER
Be sure to perform TEST in the INPUT ASSIGNMENTS in the Game Test Mode after
replacing or adjusting switches.
A5mmhexagonalwrenchisrequiredforthefollowingprocedure.
1
Turn off the power.
2
Remove the 8 hexagon socket button head screws from both sides of the Control Panel’s front and back.
3
Gentle lift the Control Panel Cover and place to one side.
10-1FIG.01
D-PAD
Remove the (4) fi xings from the rear
of the Control Panel Cover
Remove the (4) fixings from the
front of the Control Panel Cover
10-1FIG.02
Carefully raise the Control
Panel Cover