15
REPLACING SUPPLIES AND MAINTENANCE
Replacing the toner collection container
The toner collection container collects excess toner that is produced during printing.
When the toner collection container becomes full, "Replace used toner container."
will appear. Follow the procedure below to replace the toner collection container.
It is also necessary to remove the toner collection container in order to replace the transfer unit. Refer
to the procedure below to remove the toner collection container when replacing the transfer unit.
Toner may spill when the toner collection container is replaced. Before
replacing the toner collection container, take measures such as placing covers
on and around the machine to prevent soiling.
1
Open the front cover.
2
Release the used toner collection container.
(1) Turn the toner collection container lock lever to the
right until it is horizontal.
(2) Tip the toner collection container forward.
Grasp the top right of the toner collection container with your right hand and
support the bottom left with your left hand, and slowly tip the container toward you.
mxc401_us_saf.book 15 ページ ２００８年１０月１５日 水曜日 午前１１時５２分
To Next Page
Loading...
Need help?
General
