5-80
SCANNER/INTERNET FAX
Contents
SCANNING BUSINESS CARDS
(Business Card Scan)
Multiple business cards can be scanned and transmitted at once.
To use this function, the business card feeder must be attached to the automatic document feeder and "Business Card
Scan Option" must be enabled in the system settings (administrator). For the attachment procedure, see "BUSINESS
CARD FEEDER" in "BEFORE USING THE MACHINE" (page 1-40).
1
Load the business cards.
2
Specify the destination.
☞
ENTERING DESTINATIONS (page 5-17)
3
Select the special modes.
(1) Touch the tab of the mode that you wish to use.
(2) Touch the [Special Modes] key.
(3) Touch the [Business Card Scan] key.
Read the message that appears and then touch the [OK] key.
☞ SPECIAL MODES (page 5-65)
4
Press the [COLOR START] key or the [BLACK & WHITE START] key.
Scanning begins. A beep will sound to indicate that scanning is finished.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation.
This function cannot be used when the scan size is specified by numerical values.
System Settings (Administrator): Business Card Scan Option
Specify whether or not the business card scan function is used.
To Next Page
Loading...
Need help?
General
