Siemens FCM2041-U3 User Manual

CHAPTER 3 | FCM2041-U3 OPERATOR INTERFACE MANUAL
MAINTENANCE MODE
3-7
Energize/De-energize In this screen you also have the option to Energize or De-energize the outputs.
The Disarm Outputs status screen returns. The components that were selected are
listed in the Components section of the screen (See Figures 3-10a and 3-10b.) In this
example for a DLC device, the Component is Relay 1, and the Output is De-Energized.
For the MLC device, the Component is All Outputs and the Output is De-Energized.
Menu:Maint:Control:Disarm
PHY:FireFinder@1, DLC@1, HFP11@2
Cancel Settings Execute
DISARM OUTPUTS
AT: FireFinder@1, DLC@1, HFP11@2
COMPONENTS: Relay 1
OUTPUT: De-Energized
Figure 3-10a Figure 3-10b
Disarm Outputs Status Screen - DLC Disarm Outputs Status Screen - MLC
At this point, the components that were selected are not yet disarmed.
Press the Execute soft key to disarm the selected components.
When the devices are disarmed, a trouble reports on the system indicating exactly
what has been disarmed and the Partial System Disable LED glows steady yellow.
Using The Arm Feature Navigate to the desired device using the More Info/+ or
(FCM2041-U3) buttons,
select the Control option by pressing the Control soft key and then Touch the box
labeled Arm.
The Arm Devices screen displays showing the location (In this example, AT:
FireFinder@1, DLC@1, HFP11@2). See Figure 3-11.
10:53
Category text information
Menu:Maint:Control:Arm
PHY:FireFinder@1, DLC@1, HFP11@2
Cancel Settings
ARM DEVICES
AT: FireFinder@1, DLC@1, HFP11@2)
Execute
Figure 3-11
Arm Devices Screen
To arm all elements associated with the device, press the Execute soft key.
Menu:Maint:Control:Disarm
PHY:FireFinder@1, MLC@2, FP11@2
Cancel Settings Execute
DISARM OUTPUTS
AT: FireFinder@1, MLC@2, FP11@2
COMPONENTS: All Outputs
OUTPUT: De-Energized

Siemens FCM2041-U3 Specifications

General

Brand	Siemens
Model	FCM2041-U3
Category	Fire Alarms
Language	English