CHAPTER 3 | FCM2041-U3 OPERATOR INTERFACE MANUAL
MAINTENANCE MODE
3-13
Menu:Maint:Control:Change Sensitivity
PHY:FireFinder@1, DLC@1, HFP11@2
CHANGE SENSITIVITY
AT: FireFinder@1, DLC@1, HFP11@2
# Sensitivity Devices: 1
Cancel Settings Execute
SETTINGS:
FROM: Normal
TO : Low 1
Figure 3-21a Figure 3-21b
Change DLC Sensitivity Setting Status Screen Change MLC Sensitivity Setting Status Screen
At this point, the Sensitivity setting has not been changed.
Press the Execute soft key to change the Sensitivity setting.
Control - Clear History This option can only be accessed by a user with the highest password level. Touch
the box labeled Clear History to erase any recorded History information, provided that
this system option has been enabled in the Zeus tool. The screen displays the
number of records that are currently recorded in the history file. Press the Execute
soft key to erase the history information. See Figure 3-22.
Use the Zeus tool to extract data for future reference before erasing the system’s
history, since once the history is erased it cannot be restored.
Menu:Maint:Control: Clear History
PHY:FireFinder@1
Clear History
Cancel Execute
SETTINGS:
# Records: 712
Figure 3-22
Clear History Screen
Menu:Maint:Control:Change Sensitivity
PHY:FireFinder@1, MLC@2, FP11@2
CHANGE SENSITIVITY
AT: FireFinder@1, MLC@2, FP11@2
# Sensitivity Devices: 1
Cancel Settings Execute
SETTINGS:
FROM: Normal
TO : Low 1
To Next Page
Loading...
Need help?
General
