Remote-SAT User's Guide
P R E L I M I N A R Y
MC35_SAT_01_V01.01a - Preliminary Page 29 of 64 15.11.2001
1.4.7 AT^SSTGI Remote-SAT Get Information – Send Short Message (19)
Write command
AT^SSTGI=19
This command is to be used upon receiving an unsolicited result code
^SSTN:19.
The SIM Application is sending a Short Message and the TA is informed of this.
The user can be passed a string containing information to display.
Response
^SSTGI: <cmdType>, <commandDetails>, <textInfo>, <iconQualifier>, <iconId>
<CR> <LF>
Parameters
<cmdType> 19 – Proactive command ID, see Table 1
<commandDetails> This byte is RFU.
<textInfo> String to provide the user with information.
If the string is provided by the SIM and is not a null data
object (empty string), the TA shall use it to inform the user.
This is also an indication that the TA should not give any
other information to the user on the fact that the ME is
sending a short message.
If the string is a null data object (i.e. an empty string), the TA
may give own information to the user concerning what is
happening (e.g. “Please Wait”).
<iconQualifier> Unsigned Integer, range 0 – 255, used as a bitfield.
bit 1: 0 = icon is self explanatory and replaces text
1 = icon is not self-explanatory and shall be
displayed with the text
Determined value only if associated icon id is
not 0 (an icon exists).
bits 2-8: = RFU
<iconId> Unsigned Integer, range 0-255,
0: no icon
1: an icon is provided by the SIM, the icon indicated in the
command may be used by the ME to inform the user, in
addition to, or instead of the alpha identifier, as indicated with
the icon qualifier.
Reference
Siemens
Note
To Next Page
Loading...
Need help?
General
