Siemens MC35 Terminal User Manual

Remote-SAT User's Guide
P R E L I M I N A R Y
MC35_SAT_01_V01.01a - Preliminary Page 35 of 64 15.11.2001
1.4.13 AT^SSTGI Remote-SAT Get Information – Select Item (36)
Write command
AT^SSTGI=36
This command is to be used upon receiving an unsolicited result code
^SSTN:36.
The TA is supplied with a list of items allowing the user to select one. Help can
be requested by the user, if available and the presentation style is specified.
In addition to text strings and icon identifiers, a next action indicator informs the
user of the likely result of selecting a chosen item.
Response
The first line of output from the ME is:
^SSTGI: <cmdType>, <commandDetails>, <numOfItems>, <titleText>,
<defaultItemId>, <itemIconsPresent>, <itemIconsQualifier>, <titleIconQualifier>,
<titleIconId> <CR> <LF>
One line follows for every item, repeated for <numOfItems>:
^SSTGI: <cmdType>, <itemId>, <itemText>, <nextActionId>, <iconId>
<CR><LF>
Parameters
<cmdType> 36 – Proactive command ID, see Table 1
<commandDetails> Unsigned Integer, range 0 – 255, used as a bitfield.
bit 1: 0 = presentation type is not specified
1 = presentation type is specified in bit 2
bit 2: 0 = presentation as a choice of data values if bit
1 = '1'
1 = presentation as a choice of navigation
options if bit 1 is '1'
bit 3: 0 = no selection preference
1 = selection using soft key preferred
bits 4 to 7: = RFU
bit 8: 0 = no help information available
1 = help information available
<numOfItems> Number of items in the list
<titleText> String giving menu title
<defaultItemId> id of default item
The SIM may supply with the list an indication of the
default item, e.g. the previously selected item.
0 = no default item issued by the SIM application
>1 = Any value greater than 0 shall be used as an id of
the default item.
<itemIconsPresent> 0 = no Icons
1 = Icons present
<itemIconsQualifier> Unsigned Integer, range 0 – 255, used as a bitfield.
bit 1: 0 = icons are self explanatory and replace text
1 = icons are not self-explanatory and shall be
displayed with the text
Determined value only if associated icon id is

Siemens MC35 Terminal Specifications

General

Brand	Siemens
Model	MC35 Terminal
Category	Modem
Language	English