Remote-SAT User's Guide
P R E L I M I N A R Y
MC35_SAT_01_V01.01a - Preliminary Page 57 of 64 15.11.2001
2 Appendix
2.1 Appendix A – SAT Profile
SAT Profile download is used as a means of the ME telling the SIM what it is capable of. The Profile
download instruction is sent to the SIM from the ME as part of the SIM initialisation process. The profile
sent by the ME states which facilities the ME will support.
The SIM adapts its behavior to the capabilities of the ME by reducing its instruction range.
The AT command AT^SSTA is used to read the profile, please refer to chapter 1.2 AT^SSTA Remote-
SAT Activation, pg. 19.
For further information please refer to GSM 11.14 section 5.2.
Profile:
Contents: The list of SIM Application Toolkit facilities that are supported by the ME.
Coding:
1 bit is used to code each facility:
bit = 1: facility supported by ME
bit = 0: facility not supported by ME
1
b8 b7 b6 b5 b4 b3 b2 b1 hex First byte: Download
0 1 1 1 1 1 1 1 7F ME Default Profile
Profile download
SMS-PP data download
Cell Broadcast data download
Menu selection
'9EXX' response code for SIM data download error
Timer expiration
USSD string data object supported in Call Control
Envelope Call Control always sent to the SIM during
automatic redial mode
2
b8 b7 b6 b5 b4 b3 b2 b1 hex Second byte: Other
1 1 1 1 1 1 1 1 FF ME Default Profile
Command result
Call Control by SIM
Cell identity included in Call Control by SIM
MO short message control by SIM
Handling of the alpha identifier according to
subclause 9.1.3
UCS2 Entry supported
UCS2 Display supported
Display of the extension text
To Next Page
Loading...
Need help?
General
