Siemens SIMATIC IM 151/CPU User Manual

B-1
ET 200S Interface Module IM 151/CPU
A5E00058783-01
Instruction List
This appendix contains the entire set of instructions available to you for
programming the CPU component of the IM 151/CPU using STEP 7 . The typical
execution time is also specified for each instruction.
You will find detailed descriptions of all the instructions, together with examples, in
the STEP 7 programming manuals .
Note
In the case of indirect addressing (for examples see Appendix B.4), you have to
add the time for loading the address of the instruction to the execution times (see
Appendix B.5).
Overview
Appendix Contents Page
B.1 Address Identifiers and Parameter Ranges B-2
B.2 Abbreviations B-3
B.3 Tab B-3
B.4 Addressing Examples B-5
B.5 Execution Times in the Case of Indirect Addressing B-7
B.6 Instruction List B-13
B

Siemens SIMATIC IM 151/CPU Specifications

General

Brand	Siemens
Model	SIMATIC IM 151/CPU
Category	Control Unit
Language	English