Siemens SIMATIC IM 151/CPU User Manual

3-1
ET 200S Interface Module IM 151/CPU
A5E00058783-01
ET 200S in the PROFIBUS Network
Introduction
You can integrate the ET 200S with the IM 151/CPU as a node in a PROFIBUS
network. This chapter contains a description of a typical network configuration with
the ET 200S and the IM 151/CPU. It also tells you which functions can be
executed via the programming device or OP on the ET 200S and which options are
available for direct connection.
Chapter Overview
In Section Contents Page
3.1 ET 200S in the PROFIBUS Network 3-2
3.2 Setting the PROFIBUS Address 3-5
3.3 Network Components 3-7
3.4 Functions via the Programming Device/OP 3-9
3.5 Direct Communication 3-10
More Information
You will find more information on the structure of networks in the manual for the DP
master.
Connecting Fiber-Optic Cables to the IM 151/CPU FO
You can find information on connecting fiber-optic cables to the IM 151/CPU FO in
the ET 200S Distributed I/O Device manual in the chapter entitled Wiring and
Fitting . The information it contains for the IM 151 FO also applies to the
IM 151/CPU FO.
3

Siemens SIMATIC IM 151/CPU Specifications

General

Brand	Siemens
Model	SIMATIC IM 151/CPU
Category	Control Unit
Language	English