Siemens SIMATIC V2 User Manual

Installing and connecting the device
3.3 Mounting the PRO device
IFP V2, IFP V2 PRO, IFP V2 ETH
Operating Instructions, 03/2023, A5E46641410-AE
51
3.3.3 PRO devices for support arm (extendable, round tube)
Requirement
• One of the following support arm systems:
– Support arm with round tube end with outside diameter 48.3 mm, appropriate for the
opening of the PRO device
When selecting the round tube, ensure that its inside diameter is large enough so that
all needed cables and their connectors can fit through.
– Support arm with mechanical interface, appropriate for the flange of the flange mount
adapter, and Siemens flange mount adapter (not included in product package)
– Support arm with mechanical VESA interface, the corresponding Siemens adapter set
and the Siemens flange mount adapter (not included in product package)
See also section "System components for PRO devices (Page 20)".
• The PRO device, all packaging components and protective films have been removed
• The lower cover of the PRO device from the accessory kit
• Torque screwdriver with T20 insert
• The following cables are fed through the support arm to which the device is mounted:
– Equipotential bonding cable
– Power supply cables
– Data cables, e.g. USB, DisplayPort or Ethernet cable

Siemens SIMATIC V2 Specifications

General

Brand	Siemens
Model	SIMATIC V2
Category	Monitor
Language	English