Installing and connecting the device
3.5 Connecting the device
IFP V2, IFP V2 PRO, IFP V2 ETH
64 Operating Instructions, 03/2023, A5E46641410-AE
USB cable Type B connector - Type A connector
Possible number of standard versions or PRO devices on a PC
A free USB interface and a free DisplayPort/DVI interface on the PC is required for each
connection of a standard version to a PC. This means that the possible number of IFPs on a PC
is defined by the number of available USB and DisplayPort/DVI interfaces of the PC.
Possible number of PCs on a standard version
As soon as the DisplayPort interface of the standard version is connected to a PC, no video
signals can be transmitted via the DVI interface of the standard version and vice versa. This
means that exactly one PC can be connected to a standard version.
3.5.4.3 Connecting the extended version or PRO device to a PC
Standard operation up to distance of 5 meters
You can connect an extended version or a PRO device for distances of less than 5 m to the PC
directly using the following cables:
• DisplayPort cable, maximum length 5 m
• USB cable, maximum length 5 m
Wiring diagram
The following figure shows an example of the direct connection of an IFP1500 V2 extended
to an IPC427E and is generally valid for all extended versions and PRO devices in connection
with a SIMATIC IPC.
To Next Page
Loading...
Need help?
General