Siemens SIMOTICS S-1FT2 User Manual

1.2 About this manual
1.2.1 Content
Description
These Operating Instructions inform you about the motor and its components. You will learn
how to handle the motor properly and safely from delivery to disposal:
• Transporting and storing
• Assembly and mounting
• Connecting
• Commissioning
• Checking
• Operation
• Troubleshooting
• Disassembling
• Disposal
To illustrate possible application areas for our products, typical use cases are listed in this product
documentation and in the online help. These are purely exemplary and do not constitute a
statement on the suitability of the respective product for applications in speci󹪝c individual cases.
Unless explicitly contractually agreed, Siemens assumes no liability for such suitability.
Suitability for a particular application in speci󹪝c individual cases must be assessed by the user,
taking into account all technical, legal, and other requirements on a case-by-case basis. Always
observe the descriptions of the technical properties and the relevant constraints of the
respective product contained in the product documentation.
This documentation should be kept in a location where it can be easily accessed and made
available to the personnel responsible.
Information regarding third-party products
Note
Recommendation relating to third-party products
This document contains recommendations relating to third-party products. Siemens accepts the
fundamental suitability of these third-party products.
You can use equivalent products from other manufacturers.
Siemens does not accept any warranty for the properties of third-party products.
Introduction
1.2About this manual
SIMOTICS S-1FT2 synchronous motors for SINAMICS S120
8 Operating Instructions, 12/2023, A5E50610821B AF

Siemens SIMOTICS S-1FT2 Specifications

General

Brand	Siemens
Model	SIMOTICS S-1FT2
Category	Engine
Language	English