Siemens SIMOTICS S-1FT2 User Manual

1.2.2 Target group
Description
These operating instructions are intended for:
• Fitters
• Commissioning engineers
• Machine operators
• Service and maintenance personnel
• Warehouse personnel
• Personnel decommissioning the motor
• Personnel disposing of the motor
1.2.3 Avoiding dangers
Description
Avoid dangers. Ensure safe, problem-free operation and a maximum service life:
• Before you start using the motor, you must read these Operating Instructions.
• Always follow the safety instructions and notices in these operating instructions.
The warning notice system is explained at the beginning of this document.
You can 󹪝nd additional information in the relevant Con󹪝guration Manual.
1.2.4 Standard scope
Description
This documentation describes the functionality of the standard scope. This scope may di󹪜er
from the scope of the functionality of the system that is actually supplied. Please refer to the
ordering documentation only for the functionality of the supplied drive system.
Further functions may be executable in the system, which are not explained in this
documentation. However, there is no entitlement to these functions in the case of a new
delivery or service.
This documentation does not contain all detailed information on all types of the product.
Furthermore, this documentation cannot take into consideration every conceivable type of
installation, operation and service/maintenance.
The machine manufacturer must document any additions or modi󹪝cations they make to the
product themselves.
Introduction
1.2About this manual
SIMOTICS S-1FT2 synchronous motors for SINAMICS S120
Operating Instructions, 12/2023, A5E50610821B AF 9

Siemens SIMOTICS S-1FT2 Specifications

General

Brand	Siemens
Model	SIMOTICS S-1FT2
Category	Engine
Language	English