Siemens SIMOTICS S-1FT2 User Manual

3.3 Data on the conformity and rating plate
Positions of the conformity and rating plates on the motor
The following plates are attached to the motor.



① Conformity plate
② Motor rating plate
③ Fan rating plate (only for force-ventilated motors)
Figure3-4 Position of the plates (example illustration)
3.3.1 Conformity plate with ID code
Description
The motors can be 󹪝tted with a conformity plate.

① ID link
Figure3-5 Conformity plate with ID link
Digital product information as ID link
The ID link according to IEC 61406 provides you with digital information about your product.
The ID link is a globally unique identi󹪝er and is located as a QR code on the product.
You can recognize the ID link by the frame with a black corner at the bottom right.
Description of the motors
3.3Data on the conformity and rating plate
SIMOTICS S-1FT2 synchronous motors for SINAMICS S120
Operating Instructions, 12/2023, A5E50610821B AF 37

Siemens SIMOTICS S-1FT2 Specifications

General

Brand	Siemens
Model	SIMOTICS S-1FT2
Category	Engine
Language	English