Siemens SIMOTICS S-1FT2 User Manual

12.2 Decommissioning, disassembling the motor
The removal of the motor must be performed and/or supervised by quali󹪝ed personnel with
appropriate expert knowledge.
Precondition
Removing the motor must be performed and/or supervised by quali󹪝ed personnel with
appropriate expert knowledge.
Removing the motor from the machine
Procedure
1. Check to make sure that the motor is voltage-free on all sides.
2. Let the motor cool down enough so that you are not burnt.
3. Disconnect all electrical connections. Information on this is provided in Chapter "Handling
the quick-action locking (Page82)".
4. Remove the 󹪝xing elements from the motor.
5. Transport the motor to a suitable location for disposal.
❒
Dispose of the motor in accordance with the local legal requirements.
Decommissioning and disposal
12.2Decommissioning, disassembling the motor
SIMOTICS S-1FT2 synchronous motors for SINAMICS S120
114 Operating Instructions, 12/2023, A5E50610821B AF

Siemens SIMOTICS S-1FT2 Specifications

General

Brand	Siemens
Model	SIMOTICS S-1FT2
Category	Engine
Language	English