Siemens SIPART DR24 User Manual

Manual
4
SIP ART DR24 6DR2410
C79000-G7476-C153-03
Classification of safety--related notices
This manual contains notices which you should observe to ensure your own personal safety, as well
as to protect the product and connected equipment. These notices are highlighted in the manual
by a warning triangle and are marked as follows according to the level of danger:
!
DANGER
indicates an immenently hazardous situation which, if not avoided, will result in death or serious inury.
!
W ARNING
indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
!
CAUTION
used with the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
CAUTION
used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
NOTICE
indicates a potential situation which, if not avoided, may result in an undesirable result or state.
.
NOTE
highlights important information on the product, using the product, or part of the documentation that is of
particular importance and that will be of benefit to the user.
Copyright e Siemens AG 2006 All rights reserved
The reproduction, transmission or use of this document or
its contents is not permitted without express written autho-
rity. Offenders will be liable for damages. All rights, inclu-
ding rights created by patent grant or registration of a utility
model or design, are reserved.
Siemens AG
Automation and Drives
Postfach 48 48
90437 NÜRNBERG
DEUTSCHLAND
Disclaimer of Liability
We have checked the contents of this manual for agree-
ment with the hardware and software described. Since
deviations cannot be precluded entirely, we cannot guaran-
tee full agreement. However, the data in this manual are
reviewed regularly and any necessary corrections included
in subsequent editions. Suggestions for improvement are
welcomed.
e Siemens AG 2006
Technical data subject to change.
Trademarks
SIMATICR,SIPARTR,SIRECR, SITRANSR registered trademarks of Siemens AG.
Third parties using for their own purposes any other names in this document which refer to trademarks might infringe upon the
rights of the trademark owners.

Siemens SIPART DR24 Specifications

General

Brand	Siemens
Model	SIPART DR24
Category	Controller
Language	English