To Next Page

To Previous Page

6 General Repair

6B Hand Controls Repair

6 - 24

Figure B–16. Front Shift Lever Rod/Shift Lever

Assembly Attachment (Broadmoor

Model Shown)

Shift Lever Rod Service

BROADMOOR LATE MODEL HYDROS

1. Remove battery from unit to provide access to front

shift lever rod assembly at base of shift lever assem-

bly (Figure B–16)

2. Remove cotter pin that secures front shift lever rod to

shift lever arm, and set spacer aside for reuse when

reassembling rod.

Figure B–17. Idler Arm Assembly Area - Underside

Of Unit

3. Safely elevate and support unit (mower deck re-

moved) for working access to idler arm assembly

area and related shift linkage parts (Figure B–17)

Figure B–18. Remove Cotter Pin

4. After noting assembly position of front and rear clutch

rods (to ensure proper assembly when reassembling

parts), remove cotter pin and washer from clutch rod.

5. Disengage the drive spring from the underside of the

frame to release tension on the idler arm assembly,

and remove.

Cotter Pin

Shift Lever

Assembly Arm

Idler Arm

Assembly

Front Shift

Lever Rod

Rear Shift

Lever Rod

Cotter Pin

Washer

Clutch Rod

Simplicity LTH Series Service Manual

Other manuals for Simplicity LTH Series