ALC700 Series Light Tower Set Controller
ALC700 Series Light Tower Set Controller 2018-03-02 Version 1.4 Page 25 of 51
6 PROTECTIONS
6.1 WARNING ALARMS
Warnings are not shutdown alarms and do not affect the operation of the genset. Alarm
information will be displayed on the LCD.
Warning alarms types are as follows:
When controller detects the temperature is higher than the
set value, it will send warning signal and the corresponding
alarm information will be displayed on the LCD.
When controller detects the oil pressure is lower than the set
value, it will send warning signal and the corresponding
alarm information will be displayed on the LCD.
When controller detects the speed is higher than the set
value, it will send warning signal and the corresponding
alarm information will be displayed on the LCD.
When controller detects the speed is lower than the set
value, it will send warning signal and the corresponding
alarm information will be displayed on the LCD.
When controller detects the speed is 0, it will send warning
signal and the corresponding alarm information will be
displayed on the LCD.
When controller detects the generator frequency is higher
than the set value, it will send warning signal and the
corresponding alarm information will be displayed on the
LCD.
When controller detects the generator frequency is lower
than the set value, it will send warning signal and the
corresponding alarm information will be displayed on the
LCD.
When controller detects the generator voltage is higher than
the set value, it will send warning signal and the
corresponding alarm information will be displayed on the
LCD.
When controller detects the generator voltage is lower than
the set value, it will send warning signal and the
corresponding alarm information will be displayed on the
LCD.
When controller detects the generator current is higher than
the set value, it will send warning signal and the
corresponding alarm information will be displayed on the
LCD.
To Next Page
Loading...
Need help?
General
