SMC Networks JXC73 Series User Manual

- 25 -
No.SFOD-OMT0010-B
4. Product Specifications
4.1 Basic Specifications
Basic specifications of the product.
Item
Specifications
Number of axes per
controller
Max. 4 axis
Controlled motor
Step motor (servo 24 VDC )
Controlled encoder
Incremental phase A / B (Encoder resolution 800 pulse / rotation)
Power supply
specification
Note1)
Main control power supply
Power supply voltage: 24VDC+/-10%
Max. current consumption: 300mA
Motor drive and motor control power supply
Power supply voltage: 24VDC+/-10%
Max. current consumption: Depends on connected actuator.
Note2)
Parallel input
16 inputs (Optically isolated)
Parallel output
32 outputs (Optically isolated)
Serial
communication
USB2.0 (Full Speed 12Mbps)
Memory
Flash ROM and EEPROM
LED indicator
PWR (green), RUN (green), USB (green), ALM (red)
Lock control
With forced lock-release terminal
Note3)
Cable length
I/O cable: 5 m maximum
Actuator cable: 20 m maximum
Cooling method
Natural air cooling
Operating
temperature range
0 to 40
o
C (No freezing)
Operating humidity
range
90% RH or less (No condensation)
Storage
temperature range
-10 to 60
o
C (No freezing)
Storage humidity
range
90% RH or less (No condensation)
Insulation
resistance
Between the external terminals and case
50MΩ (500 VDC)
Weight
1050 g (Direct mounting)
1100 g (DIN rail mounting)
Note 1) Do not use a power supply with "inrush currentprotection" for the motor drive power
and motor control power supply.
Note 2) Power consumption depends on the actuator connected.Refer to the actuator
specifications for further details.
Note 3) Applicable to non-magnetizing lock.

SMC Networks JXC73 Series Specifications

General

Brand	SMC Networks
Model	JXC73 Series
Category	Controller
Language	English