SMC Networks JXC73 Series User Manual

- 28 -
No.SFOD-OMT0010-B
4.4 Mounting
(1) Mounting
There are two ways to mount the controller. (Direct mounting with screws and DIN rail mounting)
Controller mounting methods are shown below.
(a) Direct Mounting with four M5 screws
(b) DIN rail mounting
The figure on the right shows how to mount the DIN rail
mounting brackets.
Secure the DIN rail mounting bracket using the mounting
screws (M5 x 8) 2 places on one side (4 places on both
sides). (Appropriate tightening torque: 3.0Nm)
Secure the DIN rail mounting bracket using the holding
screws (M5 x 14). 1 place on one side (2 places on both
sides). Tighten for approximately 2 threads.
Do not tighten completely.
Mounting screw
M5X8
Included with DIN
rail mounting
bracket
Tightening torque:
3.0 (Nm)
Holdingscrews
M5X14
Included withDIN
rail mounting bracket
Tightening torque: 0.4 to 0.6[Nm]
Mounting screw (M5) 4pcs.
(prepared by customer)

SMC Networks JXC73 Series Specifications

General

Brand	SMC Networks
Model	JXC73 Series
Category	Controller
Language	English