Operation Using the Supplied Remote Commander
71
Adjusting the Camera
1 Set the IR SELECT switch on the rear
of the camera you want to operate to 1,
2 or 3.
2 Press the CAMERA SELECT button
on the remote commander that
corresponds to the number set in step
1.
Then, you can operate the camera(s)
specified by number. Every time you operate
the camera(s) using the remote commander,
the CAMERA SELECT button pressed in
step 2 lights.
Adjusting the
Camera
Focusing the camera on a subject
automatically
Press the AUTO button.
The camera focuses on the subject at the
center of the screen automatically.
Focusing the camera on a subject
manually
After pressing the MANUAL button, press
either the FAR or the NEAR button to have
the camera focus on the subject.
When you shoot a subject with a light source
behind it, the subject becomes dark. In such
a case, press the BACK LIGHT button.
Operating Multiple Cameras
with the Remote Commander
CAMERA
SELECT
Focusing on a Subject
Shooting with Back Lighting
Focusing on a far
subject
Focusing on a
near subject
To Next Page
Loading...
Need help?
General
Weight and Dimensions
