Sungrow Logger1000 User Manual

8 Web Interface User Manual
36
8.5 Web Menu
The Web has seven main function modules: "Overview", "Device monitoring",
"Device", "Power Control", "History Data", "System", and "About".
The permissions of the O&M users are as follows:
Main menu
Overview
Device
monitoring
Device
Power control
General
information
Active power
Reactive power
Device list
Firmware update
Inverter log
Transfer
configuration
Emergency
button
Interface
Current alarms
History data
Operation
logbook
System
Run-info
System
maintenance
System time
About
Remote
maintenance
Message export
8.6 Operation Procedure
Perform the following operations before logging into the Logger1000 Web for the
first time.
Step 1 Complete the electrical connections.
Ensure that the Logger1000 has been correctly connected to other devices. Refer to
the chapter "6 Electrical Connection".
Step 2 Configure serial ports of the Logger1000.
After logging into the Web, first configure the serial ports of the Logger1000, to
ensure that the Logger1000 can normally communicate with upstream devices.
Refer to the chapter "8.11.7 Interface
Step 3 Calibrate the system time.
Check whether the current system time is correct, and perform manual time
synchronization or automatic time synchronization when necessary. Refer to the
chapter “8.11.5 System Time”.
Step 4 Automatically search the device.

Sungrow Logger1000 Specifications

General

Brand	Sungrow
Model	Logger1000
Category	Data Loggers
Language	English