Sungrow Logger1000 User Manual

8 Web Interface User Manual
48
Click "Export" to export the message.
8.11.5 System Time
Click the "System time" to check whether the current system time is correct,
synchronize the system time, and enable/disable "Inverter timing".
Click "System" -> "System time" to enter the corresponding interface.
Method of setting system time:
1. When the option "Inverter timing" is selected, device time will be
synchronized with the time of Logger1000.
2. When the clock source is set to "User define", user can manually set the
current system time and time zone in the following two manners:

Select "Use PC time" to synchronize the time of the Logger1000 with the time of
the PC.

Click the "Time zone" pull-down-list and select the local time zone. Enter the
"Date" and "Time" and click "Save" to manually set the time of the Logger1000.
It is recommended to select "User define" during debugging.
3. When the clock source is set to "NTP", time of all devices can be synchronized.
Click the "Time zone" pull-down-list and select the local time zone. Fill in the
domain, set the time interval, and click "Save". In this way, the time of the
Logger1000 is synchronized with the time of the server.
4. The clock source is set to "IEC104". In this way, the Logger1000 and the
background must use the IEC104 communication protocol, and otherwise,
this manner is invalid.
5. The clock source is set to "iSolarCloud".
6. The clock source is set to "MODBUS-TCP".
It is recommended that the top priority should be given to the IEC104 and then the
iSolarCloud.

Sungrow Logger1000 Specifications

General

Brand	Sungrow
Model	Logger1000
Category	Data Loggers
Language	English