Sungrow Logger1000 User Manual

8 Web Interface User Manual
40
Initial parameters can be set in two manners: single setting and batch setting.
Single setting: select the desired country (region) and grid type, and click "Setting"
to set initial parameters for the single device.
Batch setting: select the desired country (region) and grid type, and click "Configure
synchronization". Select the desired devices in the pop-up device list, and click
"Save" to achieve batch setting.
8.8.4 Protection Parameter
Click "Device monitoring" -> "Protection parameter" to enter the corresponding
interface and set protection parameters.
Protection parameters can be set in two manners: single setting and batch setting.
For specific setting method, refer to "0On this interface, voltage and current
information of multiple inputs of MPPTs and strings can be viewed.
".
8.8.5 General Parameter
Click "Device monitoring" -> "General parameters" to enter the corresponding
interface and set general parameters.

Sungrow Logger1000 Specifications

General

Brand	Sungrow
Model	Logger1000
Category	Data Loggers
Language	English