Only qualified personnel can change the country setting.
Unauthorized alteration of the country setting may cause a breach of
the type-certificate marking.
Risk of inverter damage due to electrostatic discharge (ESD).
By touching the electronic components, you may damage the inverter.
For inverter handling, be sure to:
avoid any unnecessary touching; and
wear a grounding wristband before touching any connectors.
Disconnect the inverter from all the external power sources
before service!
Do not touch live parts until 10 minutes after disconnection
from the power sources.
There is a danger from a hot surface that may exceed
60 °C.
Danger to life due to high voltages!
Only qualified personnel can open and service the inverter.
Check the user manual before service!
* The warning label in English has been pasted before delivery. The labels in
other languages are included in the delivery contents and users may paste the
corresponding label according to specified need.
1.4 Skills of Qualified Personnel
All installations should be performed by qualified personnel. They should have:
training in the installation and commissioning of the electrical system, as well
as the dealing with hazards
knowledge of the manual and other related documents
knowledge of the local regulations and directives
To Next Page
Need help?
General
