User Manual 3 Unpacking and Storage
27
E-Net module Wi-Fi module
The meter figures in this document have been created for the
single-phase Energy Meter unless otherwise specified.
More detailed information on the Energy Meter can be found in the
respective Quick Installation Guide.
3.4 Inverter Storage
Proper storage is required if the inverter is not installed immediately.
Store the inverter in the original packing case with the desiccant inside.
The storage temperature must be always between -30°C and +70°C , and the
storage relative humidity must be always between 0 and 100 %,
non-condensing.
In case of stacking storage, the number of stacking layers should never
exceed the limit marked on the outer side of the packing case.
The packaging must be upright.
If the inverter has been stored more than half a year, the qualified personnel
should thoroughly check and test it before using.
To Next Page
Loading...
Need help?
General