2-70
CONTROLS
LOAD SAFETY DEVICE (IF EQUIPPED)
The load safety devices include an
emergency shut-off valve and an overload
warning device.
Emergency shut-off valve
• If the boom or arm stops due to the
breakage of hose, immediately move
away from the load being lifted and go
to a safe location.
• Since the emergency shut-off valve (1)
is a safety device, you must not
disassemble it and/or replace or adjust
its internal part. Takeuchi shall not be
held responsible for any injuries,
accidents or product malfunction
caused by disassembly.
The emergency shut-off valve (1) prevents
the boom or arm from falling rapidly in case
the hydraulic hose is broken.
Boom
Arm
If the hose breaks and the emergency shut-
off valve (1) is activated to stop the operation
of boom or arm, lower the boom or arm by
slowly operating the lever while ensuring
safety. Ask your sales or service dealer for
repair.
ACCESSORIES
Second boom (2-Piece boom)
To Next Page
Loading...
Need help?
General
